Binks MACH 1SL - User Manual

Illustration Key
1. Lightweight Air Nozzle
2. Fluid Inlet 3/8" NPS(m)
3. Extra Smooth Trigger Action
4. Stainless Steel Fluid Nozzle and Needle
5. Side Port Control
6. Fluid Control Knob
7. Forged Aluminum Body
8. Air Inlet 1/4" NPS(m)
4
Binks MACH 1SL HVLP
SPRAY GUN
Mach 1SLA (Adjustable Fluid Inlet)
& Mach 1SLV (Vitreous)
The Binks MACH 1SL HVLP Gun is a
top quality high performance air spray
gun . You only have to pick it up to feel
the difference. Its superbly balanced
forged aluminum body offers the operator
extra comfort and control. All of the gun’s
components are machined and finished to
exacting tolerances and only the best
materials are used, ensuring years of
peak efficiency.
The MACH 1SL HVLP airspray gun has
special nozzles and modifications that
allow it to operate at high transfer
efficiencies in compliance with the
“California South Coast Air Quality
Management District” regulations as a
“high volume, low pressure” airspray gun.
The air inlet passage in the gun body
incorporates a venturi which limits air-
flow. High pressure, low volume airflow
is converted to high volume, low pressure
at this point. Special air and fluid nozzles
enable the gun to atomize fluid at low air
pressures and velocities, creating the “soft
spray” effect for high transfer efficiencies.
To obtain optimum performance from
your new MACH 1SL HVLP airspray
gun, read all instructions carefully.
Package Contents
Please note that your Binks MACH
1SL HVLP airspray gun package was
shipped with the following contents.
If anything in the following list is miss-
ing, call 1-800-99-BINKS for a prompt
shipment to you of the missing item.
1 MACH 1SL Spray Gun
1 Part Sheet . . . . . . . . . . . 2665
1 Gunners Mate
1 Gun Brush
5
6
7
2
1
3
8
Replaces
Part Sheet
77-2665R-3
Part
Sheet
77-2665R-4
NOTE
IMPORTANT REGULATORY NOTE regarding
the use of this product appears on page 8.

Binks MACH 1SL Specifications

General

Brand	Binks
Model	MACH 1SL
Category	Paint Sprayer
Language	English

Summary

Package Contents

Illustration Key

Key to numbered parts of the spray gun illustration.

Installation Types

Pressure Cup Hookup

Details for connecting the spray gun using a pressure cup.

Pressure Tank Hookup

Explains connecting the gun to a pressure tank with one regulator.

Pressure Tank with Two Regulators

Describes connecting the gun to a pressure tank with two regulators.

Pressure Circulating Hookup

Explains the hookup for a pressure circulating system.

Air Pressure Considerations

Operation and Maintenance Guide

Spray Gun Setup Instructions

Guidance on connecting the spray gun to air and fluid hoses for spraying.

Spray Gun Cleaning Procedures

Instructions on how to clean the spray gun, adhering to VOC regulations.

Maintenance and Adjustment Procedures

Steps for replacing parts and adjusting the needle assembly.

Parts List

Fluid Nozzle Guide

Standard Fluid Nozzles

Details standard fluid nozzle types and their applications.

GS Fluid Nozzles

Information on GS fluid nozzles for specific finishes and applications.

Special Purpose Nozzles

Describes specialized nozzles for heavy fluids, feathering, and fine finish.

Air Nozzle Guide

Air Pressure Recommendations

Recommendations for air pressure settings based on fluid type and nozzle.

Nozzle Selection Chart Guide

Guidance on how to interpret and use the nozzle selection chart.

HVLP Air Nozzles

Specific details and recommendations for HVLP air nozzles.

Spray Technique and Operation

Spraying Fundamentals

Covers general instructions, fan spray, and fluid flow control.

Adjustment and Assembly Care

Details on needle assembly adjustment and nozzle/needle care.

Spray Gun Troubleshooting

Faulty Spray Pattern

Common causes and solutions for faulty spray patterns.

Intermittent Spray

Troubleshooting intermittent spray patterns due to insufficient fluid or leaks.

Important Regulatory Note