Binks Signature Series - User Manual

Binks Model 95
SPRAY GUN
6121-XXXX-X
Model 95 Signature Series
Spray Gun
This handheld gun is the premier spray
gun in the Binks line. A combination
of the three best industrial spray guns,
Model 95 sets a new standard.
The Model 95 is a high production
gun with stainless steel fluid passages
which may be used with most coat-
ings. This new gun replaces Models
18, 62 and BBR spray guns, incorpo-
rating the best features of all three:
drop-forged anodized alumninum
body, stainless steel fluid passages,
adjustable floating needle valve, stain-
less steel or tungsten carbide fluid
nozzle, plated drop-forged brass self-
centering air nozzle, brass air valve
cartridge, adjustable spray pattern,
3/8" NPS(m) fluid inlet, 1/4" NPS(m)
air inlet. Weight 1 lb., 11 oz.
Illustration Key
1. Air Nozzle Assembly
2. Gun Body
3. Side Port Controls
4. Fluid Control Knob
5. Air Connection 1/4" NPS(m)
6. Fluid Connection 3/8" NPS(m)
1
3
2
4
5
6
Replaces
Part Sheet
77-2625R-8
Part
Sheet
77-2625R-9
PRESSURE FEED TANK HOOKUP
For medium production spraying (sin -
gle regulator).
Air pressure for atomi zation is regulated
at extractor, fluid pressure at tank regulator
(see figure 3).
PRESSURE FEED TANK HOOKUP
For portable painting operations
(double regulator).
Air pressure for atomization and fluid
supply is regulated by two individual air
regulators on tank (see figure 4).
TYPES OF INSTALLATION
SIPHON FEED CUP HOOKUP
Air pressure for atomization is regulated at
extractor. The amount of fluid is adjusted by
fluid control screw on gun, viscosity of paint,
and air pressure (see figure 1).
PRESSURE FEED CUP HOOKUP
For fine finishing with limited spraying.
Air pressure for atomization is regulated at
extractor; fluid pressure at cup regulator. For
heavy fluids and internal mix nozzle spray-
ing, fluid adjusted by control screw on gun.
Pressure cup also available less regulator
(see figure 2).
Extractor
Figure 1
Air
Siphon Cup
Extractor
Figure 5
Air
Fluid
Fluid
Regulator
Fluid
Figure 4
Air
Supply
Air Supply
Extractor
Air
Inlet
Figure 3
Air
Fluid
Outlet
Pressure
Tank
Pressure
Tank
Fluid
Oil & Water
Extractor
Cup
Regulator
Figure 2
Air
Fluid
Pressure Cup
PRESSURE FEED CIRCULATING
HOOKUP
For heavy production spraying.
Air pressure atomization regulated at
extractor. Fluid pressure regulated at fluid
regulator (see figure 5).

Binks Signature Series Specifications

General

Brand	Binks
Model	Signature Series
Category	Paint Sprayer
Language	English

Summary

Model 95 Signature Series Spray Gun

Illustration Key

Key to numbered components of the Binks Model 95 spray gun illustration.

Types of Installation

Describes Siphon Feed, Pressure Feed Cup, and Pressure Feed Tank hookups.

Safety Information and Warnings

General Warnings Terminology

Explains WARNING, CAUTION, and NOTE terminology for safety.

Specific Hazards and Precautions

Covers hazards like eye injury, electrical shock, noise, and toxic fumes.

Air Pressure and Oil;Water Extractor

Air Pressure Recommendations

Details air pressure drops with different hose sizes and recommends 5/16" hose.

Oil and Water Extractor Function

Explains the dual purpose of the extractor/regulator for clean air and pressure control.

Gun Handling Technique

Describes correct gun movement, trigger control, and spraying distance.

Air Supply System Design

Advises on pitching air lines and draining moisture for optimal air supply.

Spray Pattern Adjustment and Fault Correction

Spray Width and Fluid Control

Explains how to adjust spray width and fluid flow for desired patterns.

Siphon and Pressure Spraying Settings

Details air and fluid pressure settings for siphon and pressure spraying.

Troubleshooting Faulty Patterns

Lists common spray patterns and their causes and corrections.

Spray Gun Cleaning and Maintenance

Environmentally Compliant Cleaning

Outlines methods for cleaning spray guns while adhering to VOC regulations.

Cleaning Specific Configurations

Provides cleaning instructions for guns with quart cups, pressure containers, and circulating systems.

Air Valve and Spindle Assembly Replacement

Step-by-step guide for replacing the air valve and spindle assembly.

Needle Seal and Gland Adapter Replacement

Details the process for replacing the needle seal and gland adapter.

Daily Lubrication

Recommends daily lubrication of moving parts for longevity.

Parts List and Accessories

Standard Parts Identification

Lists standard parts with item numbers, part numbers, descriptions, and quantities.

Optional Accessories

Details optional accessories available for purchase.

Optional Springs

Lists available optional springs for different applications.

Vitreous Applications Parts

Lists parts specifically for vitreous applications.

Nozzle and Needle Selection Charts

Fluid Type and Nozzle Selection

Charts for selecting fluid, air, and nozzle types based on material viscosity.

Orifice Size Guide

Table showing orifice sizes for various nozzle numbers.

Special Nozzles for Heavy Materials

Internal Mix Heavy Material Nozzles

Illustrates and describes special nozzles for internal mix heavy materials.

Special Nozzle Cleaning

Explains the cleaning process for special nozzles.

Warranty and Sales;Service Information

Product Warranty

States that the product is covered by a 1-year limited warranty.

Sales and Service Contacts

Provides website, customer service, and technical support contact information.