Binks SG-2 Plus - User Manual

Binks
®
SG-2 Plus
TM
ROTARY 2 QT. PRESSURE CUP
Model No. 80-651—Rotary Agitator
Part
Sheet
77-2842R-2
INTRODUCTION
Binks SG-2
TM
Plus Rotary 2 Qt. Pressure Cup is ideal for compo-
nent spraying and industrial applications where small batch pro-
duction spraying is required. The 2 qt. capacity is sufficient to
complete large spray jobs without refilling the cup. Its lightweight
and rugged construction is excellent for portability, allowing the
operator to make fluid and air control adjustments quickly and
efficiently at the spray station.
The internal construction is designed for waterborne and
solvent base materials.
Other features include:
 • Stainlesssteelpick-uptube,fluidfittingsand
removable plastic liner makes it corrosion resistant.
 • “Wide-mouth”openingallowseasycleaning,plasticliner
removal and quick color change.
 • Positivegripcarryinghandleforoperatorcomfort.
 • Widestainlesssteelbaseforstabilityandcorrosion
resistance.
 • 0-50psigfluidpressurerange.
 • Optional0-10psipressurekit.
 • Silverstone
®
coated on interior and exterior of lid.
 • Rotaryagitatorformetallicsandpaintsrequiring
continuous agitation.
 • Mixedflowimpellerforsuperioragitationwith
minimal vortex.
SPECIFICATIONS
MAX. WORKING PRESSURE ....................... 50 psig 3.5 kg/cm
2
OVERALL HEIGHT ....................................... 15 11/16 in. 39.88 cm
BASE DIAMETER ......................................... 6 in. 15.24 cm
DIA. ACROSS CLOSED CLAMPS ................... 8 1/16
in. 20.47 cm
DIA. ACROSS OPEN CLAMPS ...................... 8 1/16
in. 20.47 cm
AIR INLET & OUTLET CONNECTION SIZE ... 1/4 NPS (m) --
FLUID OUTLET CONNECTION SIZE .............. 3/8
NPS (m) --
FLUID CAPACITY .......................................... 2 Qts. (U.S.) 1.9 Liters
WEIGHT ....................................................... 7lb.5oz. 3.3 kg.
AGITATOR AIR CONSUMPTION .................. 2.5 cfm @ 7.5 cfm @
40 psi 100 psi
WARNING
A ll air and fluid pressure in the system must be relieved
before servicing the cup and before cup is filled or cleaned.
Attempting to service the cup while pressurized could
result in damage to components or personal injury.
!
Replaces
Part Sheet
77-2842R-1

Binks SG-2 Plus Specifications