Binks SG-2 PLUS 80-600 - User Manual

77-2841-R6 (6/2018) 1 / 12 www.carlisleft.com
INTRODUCTION
Binks SG-2 Plus
TM
Pressure Cup is ideal for component spraying and industrial
applications where small batch production spraying is required. The 2 qt. capacity is
sufficient to complete large spray jobs without refilling the cup. Its lightweight and
rugged construction is excellent for portability allowing the operator to make fluid
and air control adjustments quickly and efficiently at the spray station.
The internal construction is designed for waterborne and solvent base materials.
Other features include:
• Stainless steel pick-up tube, fluid fittings and removable
plastic liner makes it corrosion resistant.
• “Wide-mouth” opening allows easy cleaning,
plastic liner removal and quick color change.
• Positive grip carrying handle for operator comfort.
• Wide stainless steel base for stability and corrosion
resistance.
• 0-10 psig fluid pressure range.
• Optional 0-50 psig pressure kit (80-619) available for
high viscosity fluids.
• Fluid agitator on model 80-601 for paints requiring
continuous agitation.
• Silverstone
®
coating on interior and exterior of lid.
SPECIFICATIONS
MAX. WORKING PRESSURE .............50 psig 3.5 KG/cm
2
OVERALL HEIGHT .....................15 11/16 in. 39.88 cm
BASE DIAMETER ......................6 in. 15.24 cm
DIA. ACROSS CLOSED CLAMPS...........8 1/16 in. 20.47 cm
DIA. ACROSS OPEN CLAMPS ............8 1/16 in. 20.47 cm
AIR INLET & OUTLET CONNECTION SIZE ...1/4 NPS (m) --
FLUID OUTLET CONNECTION SIZE ........3/8 NPS (m) --
FLUID CAPACITY ......................2 Qts. (U.S.) 1.9 Liters
WEIGHT
STANDARD UNIT . . . . . . . . . . . . . . . . . . . . 4 lb.14oz. 2.21 kg.
UNIT WITH AGITATOR ...............5 lb.7oz. 2.47 kg.
MODEL NO. 80-600 (Standard)
!
WARNING
A ll air and fluid pressure in the system must be relieved
before servicing the cup and before cup is filled or cleaned.
Attempting to service the cup while pressurized could
result in damage to components or personal injury.
EN
SERVICE MANUAL
SG-2 PLUS
TM
2 QT. PRESSURE CUPS
MODEL NO. 80-600 (STANDARD)
MODEL NO. 80-601 (WITH OSCILLATING AGITATOR)

Binks SG-2 PLUS 80-600 Specifications

General

Brand	Binks
Model	SG-2 PLUS 80-600
Category	Water Heater
Language	English

Summary

Product Overview and Specifications

Introduction

Overview of the Binks SG-2 Plus Pressure Cup for industrial and component spraying applications.

Key Specifications

Details on maximum working pressure, dimensions, fluid capacity, and weight of the unit.

Safety Information and Warnings

Safety Symbol Definitions

Explanation of WARNING, CAUTION, and NOTE symbols used in the manual for safety emphasis.

Operational Safety Guidelines

Rules for safe operation, including manual reading, training, and equipment inspection.

Hazard Identification and Protection

Identification of hazards like projectiles, pinch points, static, and toxic fumes, plus PPE advice.

Emergency Medical Procedures

Guidance on handling injuries, especially injection injuries, and seeking immediate medical attention.

Setup and Operation Procedures

Typical Installation Guide

Instructions and diagram for connecting the pressure cup to spray equipment and setting pressure.

Spray Technique Best Practices

Guidance on proper gun handling, distance, and stroke for achieving a uniform spray finish.

Model 80-600 Parts and Accessories

Model 80-600 Exploded View

Visual representation of components for the Binks SG-2 Plus 2 Qt. Pressure Cup (Standard).

Model 80-600 Parts List

Detailed list of part numbers and descriptions for the 80-600 standard pressure cup.

Available Accessories and Kits

Lists optional accessories, repair kits, and conversion kits for the pressure cup.

Model 80-601 Parts and Agitator System

Model 80-601 Exploded View

Visual representation of components for the 80-601 Pressure Cup with Oscillating Agitator.

Model 80-601 Parts List

Detailed list of part numbers and descriptions for the 80-601 model with agitator.

Agitator Repair and Conversion Kits

Lists repair kits for the oscillating agitator and high-pressure conversion kits.

Pressure Conversion Kit Operation

Conversion Kit 80-619 Instructions

Steps to convert the pressure cup from low (0-10 PSI) to high pressure operation.

Warranty Policy

Warranty Coverage and Limitations

Details on Carlisle Fluid Technologies' limited warranty for materials and workmanship.

Technical Assistance and Contact Information

Information on obtaining technical support and locating distributors globally.