Binks DX200AR - EU Declaration of Conformity; Product Description; Object of Declaration; Notified Body Details and Role; Manufacturers Responsibility Statement

EN
D Smith
Director of Sales (EMEA)
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonized standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety
requirements
EN 1127-1:2011 Explosive atmospheres - Explosion prevention - Basic concepts
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres - Basic methods and
requirements
EN 13463-5:2011 Non electrical equipment for use in potentially explosive atmospheres - Protection by
constructional safety "c"
Providing all conditions of safe use / installation stated within the product manuals have been
complied with and also installed in accordance with any applicable local codes of practice.
Signed for and on behalf of Carlisle Fluid
Technologies UK Ltd:
3/5/17
Bournemouth,BH11 9LH,UK
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Product Description / Object of Declaration:
Diaphragm Pumps - DX70, DX200, DX200-3 Bare pump and
packages
This Product is designed for use with:
Solvent and Water based materials
Zone 1
Protection Level:
II 2 G c X IIB T4
Notified body details and role:
Element Materials Technology (0891)
Lodging of Technical file
This Declaration of conformity / incorporation
is issued under the sole responsibility of the
manufacturer:
Carlisle Fluid Technologies UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Suitable for use in hazardous area:
EU Declaration of Conformity
77-3207-R1.7
2/16
www.carlisleft.com