B41-818831conductiveacetal-rev0113 Model 41-818831 Conductive Acetal Ball Valve Pump Page 1
acetone and MEK, ozone, chlorinated hydrocarbons and nitro hyrdrocarbons.
Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE- molten alkali metals, turbulent liquid or
High tensile material with excellent abrasion resistance. A general purpose material with excellent resistance to most oils.
Model 41-818831
Conductive Acetal
Ball Valve Pump
Air Operated
Double-Diaphragm Pump
MATERIALS Maximum* Minimum*
Operating Temperatures
INTAKE/DISCHARGE PIPE SIZE
CAPACITY
0 to 14 gallons per minute
AIR VALVE
design
SOLIDS-HANDLING
HEADS UP TO
100 psi or 231 ft. of water
2
DISPLACEMENT/STROKE
.014 Gallon / .053 liter
CAUTION! Operating temperature limitations are as follows:
190° F
88° C
-10° F
-23° C
BINKS
®
pumps are designed to be powered only by compressed air.
190° F
88° C
-20° F
-29° C
220° F
104° C
-35° F
-37° C
180° F
82° C
-35° F
-37° C
275° F
135° C
-40° F
-40° C
II 2 G c T5
II 3/2 G c T5
II 2 D c T100°c
CAUTION:
properties. Do not expose to UV light for extended periods of time.
Maximum and Minimum Temperatures are the limits for which these
materials can be operated. Temperatures coupled with pressure affect the
longevity of diaphragm pump components. Maximum life should not be
expected at the extreme limits of the temperature ranges.
Warranty Information
5-YEAR Limited Product Warranty
Binks
®
manufacturing warrants to the original end-use purchaser that no product sold by Binks shall fail under normal use and service
due to a defect in material or workmanship within five years from the date of shipment from Binks factory.
See complete warranty at www.binks.com
To Next Page
Loading...
