9250290 Rev A
SAFETY SUMMARY
Review the following safety precautions to avoid injury and prevent damage to the equipment.
The product should be installed, commissioned, and maintained by qualified and authorized personnel only.
Install according to installation instructions and comply with all National and Local codes.
Use electrical wire that is sized and rated for the maximum voltage and current of the application.
Properly ground the enclosure to an adequate earth ground.
Observe all terminal and relay contact ratings as called out on the nameplate and in the installation manual.
Insure that the enclosure cover is in place and secured tightly during normal operation.
If this product is used in a manner not specified by the manufacturer the safety protection could be compromised.
Safety Terms and Symbols
WARNING: Warning statements identify conditions or practices that could result in injury or loss of life. Risk of
electrical shock.
CAUTION: Caution statements identify conditions or practices that could result in damage to this product or other
property.
To Next Page
Loading...