Why are absorbance values higher than expected on my Biochrom Measuring Instruments?
Elevated absorbance readings can stem from several factors: * Verify you're using the correct cell type. * Ensure cells are free from fingerprints and contamination. * Confirm correct cell orientation. * Verify the reference used.
What to do if absorbance value is lower than expected in biochrom Libra S60?
If you observe lower than expected absorbance values, consider the following checks: * Ensure sufficient height of sample solution. * Verify that the sample and reference are not the same. * Make sure the sample compartment lid is properly closed.
How to fix negative absorbance reading on biochrom Libra S60 Measuring Instruments?
To resolve a negative absorbance reading, check that the sample and reference cells have not been swapped. Also, ensure there is sufficient height of sample solution. The beam height is nominally 15 mm above the cell base for normal measurements, and it is recommended that the solution be filled to 20 mm above the base.
How to improve poor reproducibility in nucleic acid analysis using biochrom Libra S60 Measuring Instruments?
To improve reproducibility in nucleic acid analysis, check for any particles in the solution and consider using background correction. Also, try increasing the concentration of the sample.
What to check if biochrom Libra S60 will not reference?
If the instrument won't reference, check the orientation of the cuvette and verify that you are using the correct cell type.
General| Brand | biochrom |
|---|---|
| Model | Libra S60 |
| Category | Measuring Instruments |
| Language | English |
Ensures the equipment conforms to applicable safety directives and standards.
Details warning labels, symbols, and potential dangers associated with the instrument.
Description of operational controls and status indicator LEDs on the instrument.
Defines the target audience and required expertise for safe instrument operation.
Steps for setting up the instrument before commencing measurements.
Procedures and policies for instrument service, repair, or return.
Guidelines for decontamination and proper waste disposal.
To Next Page
