SAVE THE SHIPPING BOX FOR POSSIBLE RETURN OF THE INSTRUMENT.
5.2 Assemble the Left Wing:
There is a D-shaped black plate in the box. Use the flat head screws and the 1/8” hex wrench to
assemble it to the top plate in the position shown. It extends the working area for tube racks.
!
5.3 Assemble the Gradient Forming attachment:
Carefully remove the Gradient Forming attachment from its box and attach it to the right wing
position. While supporting it, screw in one of the same flat head screws you used for the left wing, then
apply all three screws.
!
When the wing is secure, apply the two motor plugs to the sockets on the right side of the instrument as
shown. Be sure that the plugs are all the way on, touching the white plastic on the socket.
!
To Next Page
Loading...