You are responsible for properly securing and managing your
smartphone. If you suspect an adverse cybersecurity event related
to the smartdot
TM
transmitter or related App, contact your healthcare
professional.
Make sure that your smartphone and the smartdot
TM
transmitter are
kept in a safe place, under your control. This is important to help
prevent anyone from accessing or tampering with your smartphone or
smartdot
TM
transmitter.
The App used with the smartdot
TM
transmitter is not intended for use on
a smartphone that has been altered or customised to remove, replace or
circumvent the manufacturer’s approved conguration or use restriction,
or that otherwise violates the manufacturer’s warranty.
The App used with the smartdot
TM
transmitter requires that your
smartphone has the correct date and time for recording your injection
data. Your smartphone’s date and time should be set to update
automatically. You can check this in your smartphone settings.
Keep your smartphone well charged and turned on to allow smartdot
TM
transmitter to transmit your injection data regularly.
Be aware that after an operation system update, there could be
unexpected behavior. Open your App, check your smartdot™ transmitter
and your App to make sure all is working properly.
Please note that if the App and the smartdot
TM
transmitter are used in
a noisy electromagnetic environment (signal near 2.4GHz), the BLE
communication is no more possible and the connection between them
is closed. However, the smartdot
TM
transmitter continues to record
injection. When the disturbing electromagnetic signals disappear, the
App and the smartdot
TM
transmitter can communicate again.
Part 12: Technical specications
31
To Next Page
Loading...