BIOCORP smartdot - Traveling with Transmitter; Pairing with New Smartphone; Data Transfer Process

How do I travel with the smartdot™ transmitter?
How does smartdot™ transfer the injection data?
How do I pair smartdot™ with a new smartphone?
• Transmitter is paired with your growlink™ app. See ‘Part 5: Preparing <C.
Pairing your smartdot™ with the growlink™ app.’
• Smartphone is near the transmitter.
• Smartphone’s Bluetooth
®
is enabled.
• growlink™ app is open.
Place your pen and attached smartdot™ transmitter in the aluetta™ storage
case. Store it according to the Saizen
®
patient information leaet.
smartdot™ automatically transfers data to your growlink™ app if your:
Once paired with growlink™, you can perform 100 injections
with smartdot™ without opening the app. The data will
synchronize at least once a month, when there is an
established connection with the app as specied above.
If you want to pair your transmitter with a new smartphone:
1. Open the growlink™ app and ensure all your injection data is synchronized.
You can manually synchronize your data through the smartdot™ settings
page in the app.
2. Reset the transmitter. See ‘Part 9: Troubleshooting guide <A. Reset your
smartdot™ transmitter’.
3. Download the growlink™ app on your new smartphone. See ‘Part 5:
Preparing <B. Downloading growlink™ app’.
4. Follow steps A-E in ‘Part 5: Preparing’.
Part 8: Frequently asked questions
D
E
F
17