How to fix Bioer GenePure Pro NPA-32P when the display screen is not on?
If the display screen of your Bioer Laboratory Equipment doesn't turn on after switching the power on, first, check the power source and ensure the device is properly switched on. If the problem persists, the fuse might be blown; in this case, replace it with a new one (F 250V 3A ?5x20). A damaged switch could also be the cause, requiring a switch replacement.
Why is the screen display abnormal on my Bioer GenePure Pro NPA-32P?
If you are experiencing an abnormal screen display on your Bioer Laboratory Equipment, it could be due to disconnected screen wires. No answer
General| Type | Nucleic Acid Purification System |
|---|---|
| Model | GenePure Pro NPA-32P |
| Purification Method | Magnetic Bead-Based |
| Temperature Control | Yes |
| Heating Temperature | Up to 100°C |
| UV Lamp | Yes |
| Connectivity | USB, Ethernet |
| Sample Types | Blood, cells, tissues, plants |
| Processing Volume | 50-1000 µL |
| Elution Volume | 20-200 µL |
| Display | Touchscreen LCD |
| Protocols | Pre-programmed and customizable |
| Power Requirements | 100-240 V, 50/60 Hz |
| Throughput | 1-32 samples per run |
Read important information carefully to prevent damage or malfunctioning.
Ensures reliable grounding and safe handling of electrical components and power lines.
Covers keeping away from electric circuits and proper AC power considerations.
Disconnect power and contact support for liquid ingress, damage, malfunction, or performance changes.
Check goods against packing list, keep packaging for repair, report damage immediately.
Confirms power supply, cord connection, grounding, and plate placement before powering on.
Explains how to switch on the system and wait for the self-test completion before use.
Switch off and contact Bioer if abnormal sound, display, or fault alarm occurs during self-testing.
Guides users on navigating to the file browsing interface and initiating file execution.
Explains methods to create new files and edit existing ones via the interface.
Describes how to initiate program execution from file browsing, history, or save interfaces.
Do not shut down the device during the upgrade process; restart as prompted.
Details common fault phenomena and their potential causes for diagnosis.
Provides specific steps to resolve identified faults and issues.
Users must not open housing; contact supplier/manufacturer for internal inspection issues.
To Next Page
