Bioer ThermoShaker MB-202

Questions and Answers

T
thardingAug 11, 2025
What to do if Bioer Laboratory Equipment body vibration is very large?
- D
  Donald LeeAug 11, 2025
  If your Bioer Laboratory Equipment vibrates excessively with abnormal sounds during oscillating operation, consider these possible causes and solutions: 1. **Incorrect Module Parts**: Ensure the correct module parts are installed. If not, replace them. 2. **Unstable Surface**: Make sure the equipment is placed on a horizontal and stable surface. If the current surface is uneven or unstable, find a new location. 3. **Defective Spherical Foot**: Check the spherical foot for wear or defects and replace it if necessary.
D
Dr. Wendy CruzAug 21, 2025
How to fix Bioer Laboratory Equipment display window if it is not bright?
- L
  Laura RichardsAug 21, 2025
  If the display window of your Bioer Laboratory Equipment is not bright after turning on the power, check the following: * **Power Connection**: Make sure the equipment is properly connected to a power source and that the power is turned on. * **Fuse**: Check the fuse. If it's burned out, replace it with a new one (250V 1.5A ?5x20mm).
C
Christina CampbellSep 1, 2025
Why Bioer Laboratory Equipment module temperature uniformity is not good?
- J
  Jessica JohnsonSep 1, 2025
  If the module temperature uniformity of your Bioer Laboratory Equipment is not good, it may be due to: * **Incorrect Module Installation**: Try reinstalling the module to ensure it is correctly fitted. * **Poor Cooling Parts**: Contact the supplier or manufacturer for assistance with the cooling parts.