1.2 Use As Intended
If the ThawSTAR
®
Automated Cell Thawing System is used in a manner not specied by BioLife in these Instructions for Use, operators are
regarded as proceeding under their own risk and warranty terms and conditions may be voided.
1.3 Packing Components
The ThawSTAR
®
Automated Cell Thawing System contains the following components:
Item Quantity Photo
ThawSTAR
®
Automated Cell Thawing System 1
AC power supply with cable for US, UK, EU 1 power supply
3 power cables
ThawSTAR
®
Conrmation Vials 2 vials
Quick Start Guide 1
Instructions For Use 1
Limited Product Warranty 1
1.4 Unpacking
Remove plastic tie inserted into unit opening and associated tape/padding completely before using. If you are missing any
components, please contact BioLife. See customer service contact information in Section 8.
1.5 Specications
Instrument
Thawing temperature Equivalent to a 37°C water bath
Thawing time Typically less than 3 minutes
Operating environment temperature 5°C to 35°C; 75% room humidity (maximum)
Storage temperature -20°C to 60°C
Maximum altitude 2,000 m
Power rating 40 W maximum
Input/Output voltage (power adaptor) AC 100 - 240V / DC 12 V, 50 – 60 Hz
Output current 3A
Phase IØ
Electrical plug formats US, UK, EU
Dimensions (Diameter x Height) 10.9 cm x 14.5 cm (4.3 in x 5.7 in)
Weight without power supply 0.7 kg (1.6 lbs)
Weight with power supply 1.2 kg (2.6 lbs)
Compliance CE mark (EMC and Safety), IEC60601, IEC61010, RoHS, WEEE
Cryogenic Vial Compatibility
Vial body external diameter 12.19-12.37 mm (0.480-0.487 in)*Measured 30.4 mm (1.2 in) from bottom of vial
Vial body external height below cap ring (minimum) 26.6 mm (1.05 in)
Overall height of vial with cap (minimum) 44 mm (1.73 in)
Vial cap diameter (maximum) 14.3 mm (0.56 in)
Vial capacity One standard 1.8 to 2.0 mL cryogenic vial
Sample volume Optimized for 1.0 mL
Vial Contents Optimized for cells in cryopreservation medium such as 10% DMSO / 20% FBS /
70% DMEM
Vial label thickness (maximum) 0.1 mm
To Next Page
Loading...
