Patient Monitor User’s manual
8-4
8.5.2 Setting Resp Waveform
Select Resp waveform area, and then enter the Resp waveform setting
menu.
Setting Wave Gain
If Resp wave on the screen is too small or be cut much, you shall select
【Wave Gain】in the Resp setting menu to change the amplitude of Resp wave.
The options are【0.25×】,【1×】,【2×】and【4×】.
Setting Wave Speed
In the Resp setting menu, select【Wave Speed】, and select proper sweep
speed in the options.
To Next Page
Loading...
