USING THE NEOGLOW ON A
NINTENDO SWITCH
®
1. On your Nintendo Switch
®
, in the home screen, select
“Controllers” and choose “Change Grip/Order”.
2. Press and hold the Sync button for five seconds on your
controller. The player indicator LEDs will cycle in
sequential order.
3. Once connected, the controller will vibrate and show on
the Nintendo Switch
®
screen. The player indicator LED will
become solid green and indicate your player number.
NOTE: Once your controller is connected to the console,
pressing the HOME button will wake up the Nintendo Switch
®
console.
USING THE NEOGLOW ON A PC
To connect the controller to a PC via Bluetooth
®
, follow these
steps:
1. Press the X and Sync buttons simultaneously for five
seconds. The first and second player indicator LEDs will
flash showing the controller has entered pairing mode.
2. You will find the controller on the list of Bluetooth
®
devices.
3. Once selected, the first and second player indicator LEDs
will become solid green.
NOTE: The controller can also be connected via the included
cable.
USING THE NEOGLOW ON AN ANDROID
™
DEVICE
1. Press the A and Sync buttons simultaneously for five
seconds. The first player indicator LED will flash showing
the controller has entered pairing mode.
2. You will find “NeoGlow Controller” on the list of Bluetooth
®
devices.
3. Once selected, the first player indicator LED will become
solid green.
CHANGING COLOR MODES
There are three color modes – smooth wave, solid breathe
and rainbow pulse.
1. To change between color modes, press the Color Mode
button twice in succession.
2. To stay on a specific color, press the Color Mode button
once.
3
To Next Page
