35
34
Setting Markers
Before meal: you test the blood glucose before meal.
After meal: you test the blood glucose after meal.
Regular test or definition by user.
Midnight: you execute the blood glucose test in midnight.
Bedtime: you execute the blood glucose test before sleep.
Exercise: you execute the blood glucose test after exercise.
Wake up: you execute the blood glucose test when you awake up.
Performing a Blood Glucose Test
CAUTION
- Do not apply your blood drop to the sample port on the strip until you see the " " appear.
The meter is performing an internal test and will display " " and " " if you apply blood
too soon. If this occurs, please repeat the test with a new test strip.
- Record the opening date of a new test strip vial. Discard the vial of test
strips 12 months after first opening.
- Always keep the metal contacts of the test strip port clean. If any dust or
dirt is present, please clean with a small, soft brush.
- All parts of this kit are considered biohazards and can potentially transmit infectious
diseases, even after you have performed the cleaning and disinfecting procedure.
- Users should wash hands wholly with soap and water after handling the meter, lancing
device, and test strips.
- Please refer to the section " Maintain the Products " on page 51 for surface cleaning.
- Do not reuse lancets. Discard used lancets properly.
According to actual life status, you can set meal markers with test result.
You have to perform meal marker setting before testing.
1. After inserting a test strip, the " " icon will flash on the screen. Pressing the Up or Down
button to choose between the " " (before meal), " " (after meal), " " (midnight), " "
(bedtime), " " (exercise), " " (wake up) and " " (no marker) and then apply the blood
sample within 2 minutes (The meter will record the marker when you apply a drop of blood).
To Next Page
Loading...
