NOTE
- RIGHTEST Max Control Solution are for RIGHTEST Max Blood Glucose Monitoring System.
If you want to purchase please contact Bionime customer service (printed on manual
coverback).
Control Solution Range:
Example of Control Solution Range
printed on your test strip vial label.
Level 1
Level 2
Level 4
Control Solution Range
Low:
Normal:
High:
mg/dL
28-48
107-145
315-426
mmol/L
1.6-2.7
5.9-8.1
17.5-23.7
45
44
About Quality Control Testing
What is a Quality Control Test ?
To ensure proper monitoring function, it is necessary to regularly perform a quality control test.
Use one of RIGHTEST Max Control Solution when testing your RIGHTEST Max Blood Glucose
Monitoring System in the Control Solution Mode. If the test result is within the Control Solution
Range printed on the strip vial label, RIGHTEST Blood Glucose Monitoring System passes the
Quality Control Test and your RIGHTEST Blood Glucose Monitoring System is working properly.
The meter displays results between 10 and 600 mg/dL (0.6 and 33.3 mmol/L).
If the test result is below 10 mg/dL (0.6 mmol/L), " " will appear on the
screen. Please repeat your test with by a new test strip.
If you still get a " " result, contact your healthcare professional.
If the test result is above 600 mg/dL (33.3 mmol/L), " " will appear on the
screen. Please repeat your test again with a new test strip.
If you still get a " " result, contact your healthcare professional.
Understanding Test Results and Messages
NOTE
- If your blood glucose result is unusually high or low, or if you question the test result,
repeat the test with a new test strip. You can also run a Quality Control Test to check your
meter and test strip. If the test result still remains unusually high or low, contact your
healthcare professional immediately.
- If you are experiencing symptoms that are not consistent with your blood glucose test
results and you surely follow all test instructions of this manual, contact your healthcare
professional immediately.
To Next Page
Loading...
