6. MEMORY STORAGE
When in “ear mode” press ON/MEM to view the stored temperatures. The
stored temperatures are indicated with the . Keep pressing ON/MEM to
scroll through each stored temperature. The thermometer stores 25 sets of
temperatures for ear measurements.
7. MEASURING TEMPERATURE - SCAN MODE
The scan mode allows you to scan surface temperature or room temperature.
This mode shows the actual, unadjusted surface temperatures, which are
different from the body temperature.
1. Power on: Press the ON/MEM button.
2. After the power is on, press and hold the ON/MEM
button and then at the same time press the SCAN
button once for the to appear on the display.
3. Hold the thermometer against the desired surface
to be measured and press the SCAN button to
obtain the real time temperature. If you press and
hold the SCAN button the temperature will be
continuously updated.
To Next Page
Loading...
