3. Press and hold the SCAN button until you hear a beeping sound.
Remove the probe from ear and the temperature measurement is
displayed on the screen.
The thermometer will beep two more times for final confirmation of the
measurement. It is now ready to take another measurement.
4. To turn the thermometer off, press and hold the ON/
MEM button for 5 seconds until “OFF” is displayed
on the screen.
Note: If thermometer is left idle for more than 1
minute it will continuously display the room
temperature.
How to Measure Ear Temperature Accurately
• The key to an accurate reading is “straightening” the ear canal to
reach the target (tympanic membrane), as the ear canal is normally
curved.
NOT ACCURATE
ACCURATE
To Next Page
Loading...
