Project Type
Instructions
Date: October 30 2020
Customer: Thermor Ltd
Job Number: TH4674
Item Number: BD201
Designer: Natalia Sigenza
PO: 24797-00
Revision: A
Artwork is not to be amended or scaled. If any changes
are required please send through Thermor oce with
instructions, and we will amend here and resend artwork
through. PLEASE RETURN WITH SIGNATURE
Contact: Graphic’s Department
graphics@thermor-ins.com
Colour Breakdown
Reason For Project:
New Item:
New Branding:
Design Update:
N/A: X
UPC (For Reference Only)
b) Why is the doctor’s reading different from the reading taken at home?
Your blood pressure can vary due to the environment (temperature, nervous condition). When measuring
blood pressure at the doctor’s office, it is possible for blood pressure to increase due to anxiety and
tension, this is known as “White Coat Hypertension”.
c) Why should I monitor blood pressure at home?
One or two readings will not provide a true indication of your normal blood pressure. It is important to
take regular, daily measurements and to keep records over a period of time. This information can be used
to assist your physician in diagnosing and preventing potential health problems.
1.6 About 3X Averaging
3X Averaging is a technology that enables optimum reliability in self-measurement of blood pressure.
Measurement accuracy is achieved by the automatic analysis of three successive measurements, with rest periods
in between.
1.6A Key Advantages
The technology provides reduction in:
• Insufficient rest prior to measurement
• Movement effects (i.e. coughing, talking, movement)
• Cuff positioning influences
1.6B Measurement Sequence
• Single results are displayed after each measurement is taken. Once all 3 measurements have been
taken the average will be displayed as the final measurement.
• The following illustration provides a flow chart of the 3X Averaging sequence
Measurement
1
Measurement
2
Measurement
3
3X
Averaging
Result
60 second
rest
60 second
rest
To Next Page
Loading...
