Ensure that children do not use the instrument unsupervised; some parts are small enough to be
swallowed.
Instrument care
Clean the instrument only with a soft, dry cloth.
Cleaning the cuff
Carefully remove spots on the cuff with a damp cloth and soapsuds.
WARNING: Do not wash the cuff in a washing machine or dishwasher!
Accuracy test
We recommend this instrument is tested for accuracy every 2 years or after mechanical impact (e.g. being
dropped). Please contact BIOS-Service to arrange the test. 1-866-536-2289
Disposal
Batteries and electronic instruments must be disposed of in accordance with the locally applicable
regulations, not with domestic waste.
9. Reference to Standards
Device standard: Device corresponds to the requirements of
the standard for non-invasive blood pressure monitors:
AAMI/ANSI SP10
IEC 60601-1
IEC 60601-1-2
EN 1060-1
EN1060-3
EN1060-4
Electromagnetic compatibility: Device fulfills the stipulations of the international
standard IEC 60601-1-2
Readings taken by the blood pressure monitor are equivalent to those obtained by a trained observer using the
cuff and stethoscope auscultation method. Clinical performance were successfully done against ANSI/AAMI
SP10 and international protocol, and the B.H.S has rated this product“ recommended for clinical and home
use”, this is the highest grading available for blood pressure monitors. Please refer to the BHS website at
www.bhsoc.org.
11
To Next Page
Loading...
