6
2.2 Activating the fitted batteries
Pull out the protective strip projecting from the battery compartment
2.3 Setting the date and time
1. After the new batteries are fitted, the year number flashes in the display. You can set the year by pressing the
M-button. To confirm and then set the month, press the TIME button.
2. You can now set the month using the M-button. Press the time button to confirm and then set the day.
3. Please follow the instructions above to set the day, hour and minutes.
4. Once you have set the minutes and pressed the TIME button, the date and time are set and the time is
displayed.
5. If you want to change the date and TIME, press and hold the time button down for approx. 3 seconds until
the year number starts to flash. Now you can enter the new values as described above.
2.4 Changing the language
You can change the language by using the following procedure:
1. While the device is switched off keep the ON/OFF button pressed until you see the letters «LAn» on the
LCD.
2. Now you can change the language by continuously pressing the M-button:
1=English, 2=Russian, 3=German, 4=French, 5=Spanish,6=Polish.
3. Confirm the selection by pressing the ON/OFF button.
2.5 Adjusting the volume
Use the VOLUME CONTROL to adjust the volume of the speaker.
To Next Page