BIOS WEATHER 261BC - Specifications and Placement; Specifications; Remote Sensor Placement; Monitor Placement

5
Project Type
Instructions
Date: September 23 2020
Customer: Thermor Ltd
Job Number: TH0951
Item Number: 261BC
Designer: Alex Vranjesevic
PO: 24735-00
Revision: A
Artwork is not to be amended or scaled. If any changes
are required please send through Thermor oce with
instructions, and we will amend here and resend artwork
through. PLEASE RETURN WITH SIGNATURE
Contact: Graphic’s Department
graphics@thermor-ins.com
Colour Breakdown
Reason For Project:
New Item: X
New Branding:
Design Update:
N/A:
UPC (For Reference Only)
7.0 Specications
7.0 Specications
Temperature Measuring Range
Monitor -50ºC to 70ºC with 0.1ºC resolution
-58ºF to 158ºF with 0.1ºF resolution
Remote Sensor -50ºC to 70ºC with 0.1ºC resolution
-58ºF to 158ºF with 0.1ºF resolution
Temperature Checking Interval
Monitor Every 30 seconds
Remote Sensor Every 30 seconds
Power Source
Monitor 2 x AA batteries, 1.5V batteries
Remote Sensor 2 x AA batteries, 1.5V batteries
(Lithium batteries are recommended
for the winter months)
Battery Life About 12 months
8.0 Remote Sensor
8.0 Remote Sensor
To prevent temperature interference, place the remote sensor away from direct
sunlight, air conditioning, and heater vents. The remote sensor is splash proof
designed, never immerse into water or expose to heavy rain. The remote sensor can
be mounted on a wall or placed on any at surface.
9.0 Monitor
9.0 Monitor
The monitor can be mounted on a wall or placed on any at surface.