f) You can adjust the level of your arm by putting a cushion under
your arm.
g) Remain seated in a comfortable room temperature for at least 5
minutes, then start the measurement.
h) For those who cannot put the cuff on the left arm, put it on the
right arm as shown.
i) Consecutive measurements will cause blood accumulation in the
lower arm which will affect the measuring results. To improve
reading accuracy, raise the arm being measured, squeeze and
relax your hand several times, then take another measurement.
Another option is to take the cuff off and wait at least 10
minutes before repeating measurement.
j) If this device was stored in low temperature, it is necessary to
leave it in room temperature for at least 1 hour, otherwise the
measurement can be inaccurate.
iÌ\
If it is not possible to fit the cuff to your left arm, it can also be placed on the
right arm. However all measurements should be made using the same arm.
Comparable blood pressure measurements always require the same conditions
(Relax for several minutes before taking a measurement).
// /" \ÊÊÌÊÕÃiÊVÕvvÊÌiÀÊÌ>ÊÌiÊÀ}>ÊVÕvvÊVÌ>i`ÊÊÌÃÊÌt
g)
h)
i)
f)
To Next Page
Loading...
