A75MH / A55MH UEFI BIOS Manual
31
DRAM Timing Configuration
MCT Timing Mode
This item allo ws you to select the DRAM Frequency programming method. If Auto,
the DRAM speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specified value. If Manual, the DRAM speed specified will be programmed
regardless of SPD.
Options: Auto (Default) / Limit / Manual
Memclock Value
This item allows you to set the Memory Clock.
Options: DDR-800 (Default) / DDR-1066 / DDR-1333 / DDR-1600 / DDR-1866
DRAM Timing Mode
This item allows you to choose to manually or automatic ally regulate the DRAM
Timing.
Options: Auto (Default) / DCT0 / DCT1 / Both
CL
Options: Auto (Default) / 4~12 CLK
2TCMD
Options: Auto (Default) / 1T / 2T