To Next PageTo Next PageWhat to do if Biostar B550GTA has no power?
First, ensure the power cable is securely plugged into the Biostar Motherboard. If the issue persists, try replacing the power cable. If problems continue, contact technical support.
Why won't my Biostar Motherboard boot from the hard drive?
Check the cable that runs from the hard disk to the disk controller board on your Biostar Motherboard. Make sure both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. It's also important to back up your hard drive, as all hard disks are capable of failing at any time.
How to fix Biostar B550GTA not booting after installing a second hard drive?
When installing a second hard drive and your Biostar Motherboard fails to boot, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. If issues persist, contact the drive manufacturers for compatibility information with other drives.
What to do if CPU overheated on Biostar B550GTA?
If the CPU overheats on your Biostar Motherboard: 1. Remove the power cord from the power supply for a few seconds. 2. Wait a moment. 3. Plug the power cord back in and boot up the system. 4. Clear the CMOS data. 5. Wait a few seconds. 6. Power on the system again.
Why does my Biostar B550GTA Motherboard show 'Invalid Configuration' or 'CMOS Failure'?
Review your system's equipment and ensure that the correct information is entered in the setup.
General| Form Factor | ATX |
|---|---|
| Socket | AM4 |
| Chipset | AMD B550 |
| Memory Slots | 4 |
| Maximum Memory | 128GB |
| PCIe 4.0 x16 | 1 |
| PCIe 3.0 x16 | 1 |
| PCIe 3.0 x1 | 2 |
| SATA 6Gb/s | 6 |
| M.2 Slots | 2 |
| USB 3.2 Gen 2 Type-C | 1 |
| Audio | Realtek ALC887 |
| Video Outputs | HDMI, DisplayPort |
| Memory Support | DDR4 3200/ 2933/ 2667/ 2400/ 2133 |
| USB 3.2 Gen 2 Type-A | 1 |
| USB 3.2 Gen 1 | 4 |
| USB 2.0 | 4 |
| LAN | Realtek RTL8111H |
Guidance on preparing a safe and suitable environment for motherboard installation.
Lists all items included in the motherboard package for verification.
Detailed technical specifications of the motherboard hardware, including CPU, memory, storage, and ports.
Explains the layout and function of all external connectivity ports on the rear panel.
Diagram and labeling of key motherboard components for easy identification.
Step-by-step guide for securely installing the Central Processing Unit (CPU) into the socket.
Instructions for properly mounting the CPU heatsink and fan assembly for effective cooling.
How to connect CPU and system fans to motherboard headers for proper airflow management.
Guide for installing RAM modules into the motherboard's DIMM slots correctly.
Details on installing various expansion cards into PCI and PCIe slots.
Explains jumper settings, including the Clear CMOS function for resetting BIOS data.
Details on power connectors, front panel headers, and internal system connections.
Details on SATA connectors and their pin assignments for connecting hard drives and SSDs.
Pinout and connection guide for the front panel USB 3.2 and USB 2.0 headers.
Pinouts for front panel audio, S/PDIF, and serial port connectors.
Information on connecting 12V and 5V RGB LED devices to the motherboard.
Information about onboard LEDs controlled by the RACING GT EVO program.
Guide on how to enter and navigate the UEFI BIOS setup utility for system configuration.
Details procedures for updating the motherboard's BIOS using different utilities.
Guide to installing and launching drivers and utilities from the provided DVD.
Step-by-step guide to install drivers and software from the provided DVD.
Utility to personalize the motherboard boot logo by loading custom BMP images.
Introduction to the comprehensive BIOSTAR utility for system management and configuration.
Displays basic system hardware information including clocks, motherboard, processor, and memory.
Controls system volume and headphone impedance for optimizing audio output quality.
Adjusts system performance modes (Normal, ECO, Sport) for different usage scenarios.
Controls RGB lighting schemes, effects, and brightness for system aesthetics.
Manages fan speeds based on temperature and user preferences for optimal cooling performance.
Monitors hardware voltages, fan speeds, and temperatures to check system health.
Allows saving/loading OC/OV profiles and adjusting system frequency and voltage settings.
Guide for installing motherboard drivers and software from the provided DVD for optimal system performance.
Reference for beep codes and POST codes indicating system status or errors during boot.
Provides solutions for common system issues, including power problems and CPU overheating.
Explains RAID definitions, features, and benefits for data storage and redundancy.
Explains RAID 0 (striping) for performance and RAID 1 (mirroring) for redundancy.
Explains RAID 10 (striping and mirroring) functionality for enhanced performance and data redundancy.
