EasyManua.ls Logo

Biostar B560MX-E PRO User Manual

Biostar B560MX-E PRO
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendors approval in wring.
The content of this users manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this users manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Table of Contents

Questions and Answers:

Biostar B560MX-E PRO Specifications

General IconGeneral
PCI Express x16 slots2
PCI Express x1 (Gen 3.x) slots1
Memory channelsDual-channel
Memory slots typeDIMM
Unbuffered memoryYes
Number of memory slots4
Supported memory typesDDR4-SDRAM
Maximum internal memory128 GB
Supported memory clock speeds2133, 2400, 2666, 2933, 3200, 3600, 3733, 3800, 3866 MHz
Audio chipRealtek ALC897
Component forPC
Motherboard chipsetIntel B560
PC health monitoringFAN, Temperature, Voltage
Audio output channels7.1 channels
Motherboard form factormicro ATX
Motherboard chipset familyIntel
Windows operating systems supportedWindows 10 x64
Processor socketLGA 1200 (Socket H5)
Compatible processor seriesIntel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Wi-FiNo
LAN controllerRealtek RTL8111H
Ethernet interface typeGigabit Ethernet
HDMI version1.4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity0
Cables includedSATA
Bundled softwareBullGuard
BIOS type-
DirectX version12.0
Parallel processing technology supportNot supported
Supported storage drive typesHDD & SSD
Supported storage drive interfacesM.2, SATA III
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Width244 mm

Summary

Chapter 1: Introduction

1.1 Before You Start

Guide on preparing for motherboard installation and safe handling practices.

1.2 Package Checklist

Lists the components included in the motherboard package.

1.3 Specifications

Details the technical specifications of the motherboard, including CPU, chipset, memory, storage, etc.

1.4 Rear Panel Connectors

Identifies and describes the ports and connectors located on the rear I/O panel.

1.5 Motherboard Layout

Provides a diagram of the motherboard, labeling key components and connectors.

Chapter 2: Hardware installation

2.1 Install Central Processing Unit (CPU)

Step-by-step instructions for installing the CPU into the motherboard socket.

2.2 Install a Heatsink

Guide on mounting the CPU cooler assembly onto the motherboard.

2.3 Connect Cooling Fans

Explains how to connect CPU and system fans to the motherboard headers.

2.4 Install System Memory

Instructions for installing DDR4 memory modules into the DIMM slots.

2.5 Expansion Slots

Describes the available PCI Express and M.2 slots on the motherboard.

2.6 Jumper & Switch Setting

Details how to configure jumpers and switches on the motherboard for various functions.

2.7 Headers & Connectors

Identifies and describes various internal headers and connectors on the motherboard.

2.8 LEDs

Explains the function of onboard debug LEDs and their indications.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

Guide to accessing and configuring settings within the UEFI BIOS.

3.2 BIOS Update

Instructions on how to update the motherboard's BIOS using available utilities.

3.3 Software

Information on installing and launching system software utilities provided with the motherboard.

Chapter 4: Useful help

4.1 Driver Installation

Steps for installing necessary drivers for system components from the included DVD.

4.2 AMI BIOS Beep Code

Lists beep codes used by AMI BIOS to indicate system status or errors.

4.3 AMI BIOS post code

Lists POST codes from AMI BIOS indicating initialization stages and potential issues.

4.4 Troubleshooting

Provides solutions for common system problems and hardware issues.

4.5 RAID Functions

Explains different RAID levels (0, 1, 10, 5) and their features.

4.6 Intel® Optane™ Technology

Details the requirements and benefits of using Intel Optane technology.

Related product manuals