E
Elizabeth JonesAug 5, 2025
What to do if my Biostar Motherboard has no power?
- JjenniferdavisAug 6, 2025
First, ensure the power cable is securely plugged into the Biostar Motherboard. If that doesn't work, try replacing the power cable.
To Next PageTo Next PageWhat to do if my Biostar Motherboard has no power?
First, ensure the power cable is securely plugged into the Biostar Motherboard. If that doesn't work, try replacing the power cable.
Why is my Biostar B550M-SILVER CPU overheating?
There could be several reasons for CPU overheating. Ensure the CPU cooler surface is evenly placed with the CPU surface and that the CPU fan is rotating normally and its speed fulfills the CPU speed. As a troubleshooting step, remove the power cord from the power supply for a few seconds, wait, plug it back in, and boot the system. If the issue persists, clear the CMOS data, wait a few seconds, and power on the system again.
What to do if Biostar B550M-SILVER won't boot from hard drive?
Check the cable running from the hard disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. It's important to back up the hard drive, as hard disks can fail at any time.
How to configure Biostar Motherboard after installing a second hard drive?
Ensure that you set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. You may also need to call the drive manufacturers to check for compatibility with other drives.
What does “Invalid Configuration” or “CMOS Failure” mean on my Biostar Motherboard?
Review your system’s equipment and make sure the correct information is in the setup.
General| Form Factor | Micro ATX |
|---|---|
| Socket | AM4 |
| Chipset | AMD B550 |
| Memory Slots | 4 |
| Maximum Memory | 128GB |
| PCIe x16 Slots | 1 |
| M.2 Slots | 2 |
| SATA Ports | 4 |
| Video Outputs | 1 x HDMI, 1 x DisplayPort |
| RAID Support | RAID 0, 1, 10 |
| Memory Speed | DDR4 4400+(OC) |
| M.2 Details | 1 x M.2 PCIe 4.0/3.0 x4, 1 x M.2 PCIe 3.0 x4/SATA |
| Audio | Realtek ALC892 |
| LAN | Realtek RTL8111H |
Essential preparation steps and safety precautions before installing the motherboard.
Lists all included accessories and components in the motherboard package.
Details the technical specifications of the motherboard, including CPU, memory, and storage.
Identifies and describes the function of all ports located on the motherboard's rear panel.
Provides a visual diagram of the motherboard, highlighting key components and connectors.
Step-by-step guide for correctly installing the CPU into the motherboard socket.
Instructions on how to properly mount the CPU heatsink and fan assembly.
Details on connecting CPU and system fans to the motherboard fan headers.
Guide on installing DDR4 memory modules into the DIMM slots for optimal performance.
Information on PCI-Express slots and M.2 sockets for adding peripherals and storage.
Explains how to configure jumpers and switches on the motherboard, like Clear CMOS.
Details various internal and external headers and connectors on the motherboard.
Explains the function of onboard LEDs, including EZ Debug indicators for troubleshooting.
How to access and navigate the BIOS setup utility to configure system settings.
Procedures for updating the motherboard's BIOS using BIOSTAR utilities.
Information on installing and using bundled motherboard software utilities.
Utility to personalize the system's boot logo using custom BMP images.
Integrated utility for system monitoring, tuning, and configuration.
Controls system volume and headphone impedance for optimized audio performance.
Adjusts system performance modes (Normal, ECO, Sport) for power and speed balance.
Customizes RGB lighting effects for motherboard components and peripherals.
Manages fan speeds based on system temperature for optimal cooling performance.
Displays real-time hardware information like voltage, fan speed, and temperature.
Allows saving, loading, and applying overclocking and voltage profiles.
Displays version information for the Racing GT EVO utility.
Guide on installing necessary drivers from the provided DVD for optimal system performance.
Explains beep codes indicating boot block and POST errors for diagnostics.
Lists POST codes related to CPU, memory, and system initialization for troubleshooting.
Provides solutions for common system issues like no power, boot failures, and CPU overheating.
Explains RAID configurations (RAID 0, 1, 10) for data storage and redundancy.
Technical specifications of the motherboard presented in Arabic.
Technical specifications of the motherboard presented in German.
Technical specifications of the motherboard presented in Spanish.
Technical specifications of the motherboard presented in Thai.
Technical specifications of the motherboard presented in Japanese.
