To Next PageTo Next PageWhat to do if my Biostar B660GTQ has no power?
If your Biostar Motherboard has no power, with no Power LED and the power supply fan not working, ensure the power cable is securely plugged in. If the problem persists, try replacing the power cable. If neither of these steps works, contact technical support.
What to do if Biostar Motherboard system does not boot from hard disk drive?
If your Biostar Motherboard system doesn't boot from the hard disk drive but boots from the optical drive, check the cable connecting the disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as hard disks can fail at any time.
What to do if my Biostar Motherboard CPU overheated?
If your Biostar Motherboard's CPU has overheated, unplug the power cord from the power supply for a few seconds, wait, then plug it back in and boot up the system. If the problem persists, clear the CMOS data. (See “Close CMOS Header: JCMOS1” section)
What to do if Biostar B660GTQ system only boots from an optical drive?
If your Biostar Motherboard system only boots from the optical drive, but hard disks can be read and applications used, back up your data and application files. Then, reformat the hard drive and reinstall applications and data using backup disks.
What to do if my Biostar B660GTQ Motherboard shows 'Invalid Configuration' or 'CMOS Failure'?
If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is in the setup.
What to do if Biostar Motherboard cannot boot after installing a second hard drive?
If your Biostar Motherboard cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturers.
What to do if my Biostar B660GTQ system is inoperative but the keyboard lights are on?
If your Biostar Motherboard system is inoperative, but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM until the module snaps into place, applying even pressure.
General| Brand | Biostar |
|---|---|
| Model | B660GTQ |
| Category | Motherboard |
| Language | English |
Safety precautions and preparation steps before installing the motherboard.
Lists all items included in the motherboard's packaging.
Detailed technical specifications of the motherboard's hardware components.
Identifies and explains the function of all ports on the motherboard's rear I/O panel.
Diagram showing the physical layout and location of motherboard components and headers.
Step-by-step instructions for correctly installing the CPU into its socket.
Guide for mounting the CPU heatsink and fan assembly for proper cooling.
Instructions for connecting CPU and system fans to the designated motherboard headers.
Procedure for inserting RAM modules into the motherboard's DIMM slots.
Details on PCIe and M.2 slot types, specifications, and usage.
Explanation of motherboard jumper configurations for system settings like CMOS clearing.
Description of various internal headers for front panel connections and system functions.
Explains the function of onboard LEDs used for system diagnostic codes.
Guide to accessing and configuring the system's UEFI BIOS settings.
Step-by-step instructions for updating the motherboard's BIOS firmware.
Guide for installing bundled software utilities from the driver DVD.
Overview of system hardware details within the BIOSTAR utility.
Utility for controlling system volume and optimizing headphone audio performance.
Utility for selecting between Normal, ECO, and Sport performance modes.
Utility for customizing RGB lighting effects on the motherboard.
Utility for intelligent fan speed management based on system temperatures.
Utility for monitoring hardware voltages, fan speeds, and temperatures.
Utility for adjusting overclocking and voltage settings for performance tuning.
Displays version information for the BIOSTAR utility software.
Guide for installing essential system drivers after operating system installation.
Reference for interpreting BIOS beep codes to diagnose boot issues.
Reference for interpreting POST codes displayed during the system boot process.
Solutions for common system boot and operational problems encountered by users.
Information on Intel Optane technology features and system requirements.
Motherboard specifications provided in the Arabic language.
Motherboard specifications provided in the German language.
Motherboard specifications provided in the Spanish language.
Motherboard specifications provided in the Thai language.
Motherboard specifications provided in the Japanese language.
