To Next Page

To Previous Page

Chapter 3: UEFI BIOS & Soware | 29

B660GTQ

B660M-SILVER

SmartEAR

Smart EAR allows you to control system volume and adjust impedance seng (Low/High

Gain) to opmize your headphone performance. You can easily enjoy high-quality and

awesome sound.

Requirements:

1. A chassis with front audio output jacks

2. An earphone or a headphone

3. Windows 7 (32/64bit)/ 8.1(64bit)/ 10(64bit) operaon system

Installaon Guide:

1. Make sure the front audio cable of the chassis connected to the front audio header of the

motherboard properly.

2. Install the RACING GT EVO program from the driver DVD.

3. Connect the earphone or headphone to the front audio jack of the chassis or audio lineout

port of rear I/Os.



IfyouwanttouseanAC’97frontaudiooutputcable,pleasedisablethe“FrontPanelJack

Detecon”seng.ThissengcanbefoundviaO.S.AudioUlity.

1. Volume Control Knob: The volume can be nely adjusted by turning the knob either

clockwise or an-clockwise to increase or decrease system volume accordingly.

2. Mute: To disable system sound.

3. High/Low Gain Switch: Keep the gain switch to low for low impedance headphone and set

to high for high impedance headphone.

Biostar B660GTQ User Manual

Other manuals for Biostar B660GTQ