To Next PageTo Next PageWhy Biostar B660GTA only boots from optical drive?
If your Biostar Motherboard system boots from the optical drive but not the hard disk, check the cable connecting the disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of failing at any time.
What to do if Biostar Motherboard has no power?
First, ensure the power cable is securely plugged in. If the issue persists, try replacing the power cable. If neither of these steps works, the problem may be more complex.
What to do if Biostar Motherboard system doesn't boot from hard disk?
Check the cable connecting the hard disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. It's important to back up your hard drive regularly, as they can fail at any time.
What to do if Biostar B660GTA shows invalid configuration?
Review your system's equipment and ensure that the correct information is entered in the setup.
How to fix Biostar Motherboard when it cannot boot after installing a second hard drive?
Set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types.
What to do if there is no power in my Biostar Motherboard?
If there is no power in the system, and the Power LED is off while the power supply fan isn't working, ensure the power cable is securely plugged in. If the problem persists, try replacing the power cable. If neither solution works, you may need to contact technical support.
How to fix Biostar Motherboard not booting after installing second hard drive?
If your Biostar Motherboard system won't boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. If issues persist, contact the drive manufacturers to ensure compatibility with other drives.
How to fix CPU Overheated on Biostar B660GTA Motherboard?
If the CPU is overheated, the CPU protection function has been activated. Remove the power cord from the power supply for a few seconds, then plug it back in and boot up the system. If the issue persists, clear the CMOS data, wait a few seconds, and power on the system again.
Why does my Biostar B660GTA show “Invalid Configuration”?
If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is in the setup.
General| Form Factor | ATX |
|---|---|
| Chipset | Intel B660 |
| Socket | LGA 1700 |
| Memory Type | DDR4 |
| Max Memory Capacity | 128 GB |
| Memory Slots | 4 |
| Video Outputs | 1 x HDMI, 1 x DisplayPort |
| Memory Support | DDR4 2133/2400/2666/2933/3200 MHz |
| PCIe Slots | 1 x PCIe 5.0 x16 |
| Audio | Realtek ALC1220 |
| LAN | Realtek RTL8125B 2.5Gbps LAN |
| M.2 Slots | 2 x M.2 (1 x PCIe 4.0 x4 |
| SATA Ports | 4 x SATA III |
| USB Ports | 1 x USB 3.2 (Gen2x2) Type-C (rear), 1 x USB 3.2 (Gen2) Type-A (rear), 5 x USB 3.2 (Gen1) (3 rear + 2 front), 6 x USB 2.0 (2 rear + 4 front) |
Guidance on preparing a safe and suitable environment for motherboard installation.
Lists the components included in the motherboard package for user verification.
Detailed technical specifications of the motherboard, including CPU, memory, and ports.
Identifies and describes the connectors available on the motherboard's rear panel.
Visual representation of the motherboard, highlighting component placement and connector locations.
Step-by-step instructions for safely installing the CPU into its socket on the motherboard.
Guide on how to properly mount the CPU heatsink and fan assembly for cooling.
Instructions for connecting CPU and system fans to the appropriate motherboard headers.
Detailed steps for installing DDR4 memory modules into the motherboard slots correctly.
Overview of the different PCI-Express and M.2 expansion slots available on the motherboard.
Instructions for installing various expansion cards, such as graphics cards, into available slots.
Explains how to configure motherboard settings using jumpers and switches, such as clearing CMOS.
Details on various internal headers and connectors for power, front panel, USB, and audio.
Information about debug LEDs and RGB LED headers on the motherboard for status indication and lighting.
Guidance on accessing and navigating the UEFI BIOS setup utility for system configuration.
Instructions on how to update the motherboard's BIOS using provided utilities.
Information on installing and using bundled BIOSTAR software utilities for system management and customization.
Steps for installing necessary drivers and software from the provided setup DVD for optimal performance.
Explanation of beep codes generated by the AMI BIOS to diagnose boot or hardware issues.
List and explanation of POST (Power-On Self-Test) codes for diagnosing hardware initialization problems.
Common issues and their solutions, including power problems, boot failures, and CPU overheating.
Explanation of RAID configurations (RAID 0, 1, 10, 5) and their features for storage management.
Overview of Intel® Optane™ Technology and its benefits for storage performance.
Technical specifications of the motherboard presented in Arabic.
Technical specifications of the motherboard presented in German.
Technical specifications of the motherboard presented in Spanish.
Technical specifications of the motherboard presented in Thai.
Technical specifications of the motherboard presented in Japanese.
