EasyManua.ls Logo

Biostar B350GT3 - User Manual

Biostar B350GT3
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendors approval in wring.
The content of this users manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this users manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Other manuals for Biostar B350GT3

Questions and Answers

  • Y
    ycunninghamAug 2, 2025
    What to do if Biostar Motherboard only boots from optical drive?
    • A
      Anthony SmithAug 2, 2025
      If the Biostar Motherboard system does not boot from a hard disk drive, but can boot from the optical drive, check the cable running from the disk to the disk controller board to ensure both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of breaking down at any time.
  • A
    Ana WalshAug 7, 2025
    How to troubleshoot no power on Biostar B350GT3 Motherboard?
    • G
      Gregory PowellAug 7, 2025
      If there is no power in the Biostar Motherboard system, and the power LED does not shine, the fan of the power supply does not work, and the indicator light on the keyboard does not shine, make sure the power cable is securely plugged in. If it is, try replacing the cable. If the problem persists, contact technical support.
  • L
    Lori HernandezAug 11, 2025
    What to do if Biostar B350GT3 system is inoperative but lights are on?
    • G
      gouldrogerAug 11, 2025
      If your Biostar Motherboard system is inoperative, but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, firmly press down on both ends of the DIMM until the module snaps into place, applying even pressure.
  • B
    Brian SimpsonAug 16, 2025
    How to fix “Invalid Configuration” error on Biostar B350GT3 Motherboard?
    • K
      klucasAug 16, 2025
      If you see an “Invalid Configuration” or “CMOS Failure” message on your Biostar Motherboard, review the system’s equipment and ensure the correct information is in the setup.
  • C
    charleskellerAug 22, 2025
    What to do if Biostar B350GT3 won't boot after installing second hard drive?
    • L
      Laura TownsendAug 22, 2025
      If the Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturers.
  • R
    Ryan RushAug 27, 2025
    What to do if Biostar B350GT3 Motherboard CPU Overheated?
    • J
      James AlexanderAug 27, 2025
      If your Biostar Motherboard CPU is overheated, remove the power cord from the power supply for a few seconds, wait, then plug the power cord back in and boot up the system. Also, clear the CMOS data. (See “Close CMOS Header: JCMOS1” section)

Summary

FCC Information and Copyright

Chapter 1: Introduction

1.1 Before You Start

Safety precautions and preparation steps before installing the motherboard.

1.2 Package Checklist

Lists the items included in the motherboard package.

1.3 Specifications

1.4 Rear Panel Connectors

1.5 Motherboard Layout

Chapter 2: Hardware installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide on how to correctly install the CPU into the motherboard socket.

2.2 Install a Heatsink

2.2 Install a Heatsink

2.3 Connect Cooling Fans

2.4 Install System Memory

2.4 Install System Memory

2.5 Expansion Slots

2.6 Jumper & Switch Setting

2.7 Headers & Connectors

ATXPWR1: ATX Power Source Connector

Information on the standard ATX 24-pin power supply connector.

ATXPWR2: ATX Power Source Connector

Specifics on the ATX power connector for CPU.

PANEL1: Front Panel Header

Details of the front panel header for power, reset, LEDs, and speaker.

SATA3_1;3_2;3_3;3_4: Serial ATA 6.0 Gb;s Connectors

Information on connecting SATA hard drives via SATA cables.

JFRONT_USB3_1;3_2: Header for USB 3.1 Gen1 (5 Gb;s) Ports at Front Panel

Details on front panel USB 3.1 Gen1 headers for external peripherals.

F_USB1;2: Header for USB 2.0 Ports at Front Panel

Details on front panel USB 2.0 headers for external peripherals.

JSPDIFOUT1: Digital Audio-out Connector

Connector for connecting the S/PDIF output bracket.

F_AUDIO1: Front Panel Audio Header

Header for connecting chassis-mount front panel audio I/O.

J_COM1: Serial Port Connector

Serial port header for connecting RS-232 devices.

5050_RGBLED1;2: RGB LED Device (5050 SMD) Header

Header for 12V power and RGB control pins for RGB LED devices.

2.8 LEDs

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

How to access and use the BIOS setup program to configure system settings.

3.2 BIOS Update

Methods for updating the motherboard's BIOS using utilities or files.

3.2 BIOS Update

BIOS Update Utility (through the Internet)

3.2 BIOS Update

BIOS Update Utility (through a BIOS file)

3.2 BIOS Update

BIOS backup

3.3 Software

BIOScreen Utility

eHot-Line

eHot-Line

System Information

SmartEAR

Vivid LED DJ

H;W Monitor

Chapter 4: Useful help

4.1 Driver Installation

Guide to installing drivers, software, and accessing the manual from the DVD.

4.2 AMI BIOS Beep Code

4.3 Troubleshooting

CPU Overheated

4.4 RAID Functions

RAID 1

Definition and explanation of RAID 1 configuration and benefits.

RAID 10 (1+0)

Definition and explanation of RAID 10 configuration and benefits.

APPENDIX I: Specifications in Other Languages

Arabic

Technical specifications of the motherboard presented in Arabic.

German

Russian

Spanish

Thai

Biostar B350GT3 Specifications

General IconGeneral
BrandBiostar
ModelB350GT3
CategoryMotherboard
LanguageEnglish

Related product manuals