Biostar B350GT3 User Manual (English)

Other manuals for Biostar B350GT3

Questions and Answers:

Y
ycunninghamAug 2, 2025
What to do if Biostar Motherboard only boots from optical drive?
- A
  Anthony SmithAug 2, 2025
  If the Biostar Motherboard system does not boot from a hard disk drive, but can boot from the optical drive, check the cable running from the disk to the disk controller board to ensure both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of breaking down at any time.
A
Ana WalshAug 7, 2025
How to troubleshoot no power on Biostar B350GT3 Motherboard?
- G
  Gregory PowellAug 7, 2025
  If there is no power in the Biostar Motherboard system, and the power LED does not shine, the fan of the power supply does not work, and the indicator light on the keyboard does not shine, make sure the power cable is securely plugged in. If it is, try replacing the cable. If the problem persists, contact technical support.
L
Lori HernandezAug 11, 2025
What to do if Biostar B350GT3 system is inoperative but lights are on?
- G
  gouldrogerAug 11, 2025
  If your Biostar Motherboard system is inoperative, but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, firmly press down on both ends of the DIMM until the module snaps into place, applying even pressure.
B
Brian SimpsonAug 16, 2025
How to fix “Invalid Configuration” error on Biostar B350GT3 Motherboard?
- K
  klucasAug 16, 2025
  If you see an “Invalid Configuration” or “CMOS Failure” message on your Biostar Motherboard, review the system’s equipment and ensure the correct information is in the setup.
C
charleskellerAug 22, 2025
What to do if Biostar B350GT3 won't boot after installing second hard drive?
- L
  Laura TownsendAug 22, 2025
  If the Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturers.
R
Ryan RushAug 27, 2025
What to do if Biostar B350GT3 Motherboard CPU Overheated?
- J
  James AlexanderAug 27, 2025
  If your Biostar Motherboard CPU is overheated, remove the power cord from the power supply for a few seconds, wait, then plug the power cord back in and boot up the system. Also, clear the CMOS data. (See “Close CMOS Header: JCMOS1” section)