To Next PageTo Next PageWhy Biostar B560GTQ Motherboard cannot boot after installing a second hard drive?
If your Biostar Motherboard system cannot boot after installing a second hard drive, ensure that you have correctly set the master/slave jumpers. Also, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturers.
What to do if Biostar Motherboard shows “Invalid Configuration” or “CMOS Failure”?
If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message on the screen, review the system’s equipment and ensure that the correct information is entered in the setup.
What to do if Biostar B560GTQ has no power?
If there is no power in your Biostar Motherboard system, and the power LED does not shine while the power supply fan doesn't work, and the indicator light on the keyboard doesn't shine, make sure the power cable is securely plugged in. If it is, try replacing the cable. If problems persist, contact technical support.
General| Socket | LGA 1200 |
|---|---|
| Chipset | Intel B560 |
| Memory Slots | 4 |
| Maximum Memory | 128GB |
| PCIe 4.0 x16 | 1 |
| PCIe 3.0 x1 | 2 |
| PCIe 3.0 x16 | 1 |
| M.2 Slots | 2 |
| SATA III 6Gb/s | 6 |
| HDMI | 1 |
| DisplayPort | 1 |
| Form Factor | Micro ATX |
| Memory Support | DDR4 2133/2400/2666/2933/3200 |
| USB Ports | 6 x USB 3.2 Gen 1, 2 x USB 2.0 |
| LAN | 1 x 10/100/1000 Mbps |
| Audio Codec | Realtek ALC897 |
| Audio | 7.1 CH HD Audio |
Safety and preparation guidelines before installing the motherboard.
List of items included in the product package.
Details on CPU, chipset, memory, storage, LAN, audio, USB, and I/O.
Diagram and explanation of ports on the motherboard's rear panel.
Visual diagram showing the placement of components and headers on the motherboard.
Step-by-step instructions for installing the CPU into the motherboard socket.
Guide for mounting the CPU heatsink and fan assembly correctly.
Instructions for inserting RAM modules into the DIMM slots.
How to connect CPU and system fans to the motherboard headers.
Details on installing cards into PCI-Express and M.2 slots.
General steps for installing add-on cards like graphics cards.
Procedure for installing an M.2 SSD, including heatsink mounting.
Explanation and procedure for configuring motherboard jumpers, e.g., Clear CMOS.
Details on various internal and external connectors like power, USB, and audio.
Information on motherboard LEDs and how they are controlled.
How to access and navigate the computer's BIOS setup utility.
Methods and steps for updating the motherboard's BIOS firmware.
Guide to installing bundled software and using utilities like BIOScreen and RACING GT EVO.
Displays basic hardware and BIOS information of the system.
Utility to adjust system volume and headphone impedance for optimal audio.
Software to adjust system power modes (Normal, ECO, Sport).
Utility for customizing the motherboard's RGB lighting effects.
Smart fan speed control utility based on system temperatures.
Monitors key hardware parameters like voltages, fan speeds, and temperatures.
Utility for saving/loading overclocking and voltage profiles.
Displays version and copyright information for the Racing GT EVO utility.
Instructions for installing essential drivers from the provided DVD.
Explanation of BIOS beep codes and post codes for system diagnostics.
Solutions for common hardware and boot problems.
Information on CPU overheating protection and recovery steps.
Details on setting up RAID 0, RAID 1, RAID 10, and RAID 5.
Guide to installing and using Intel Optane memory or storage.
Technical specifications of the motherboard translated into Arabic.
Technical specifications of the motherboard translated into German.
Technical specifications of the motherboard translated into Spanish.
Technical specifications of the motherboard translated into Thai.
Technical specifications of the motherboard translated into Japanese.
