To Next PageTo Next PageHow to fix no power issue on Biostar B560M-SILVER?
If your Biostar Motherboard has no power, and the power LED doesn't light up while the power supply fan isn't working, ensure the power cable is securely plugged in. If that doesn't work, try replacing the cable. If issues persist, further assistance is needed.
What to do if Biostar B560M-SILVER shows 'Invalid Configuration'?
If your Biostar Motherboard shows an “Invalid Configuration” or “CMOS Failure” message, review your system’s equipment and ensure the correct information is in the setup.
How to fix Biostar Motherboard not booting after installing second hard drive?
If your Biostar Motherboard cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Run the SETUP program and select the correct drive types.
What to do if my Biostar Motherboard has no power?
If there's no power in the system, and the Power LED doesn't shine while the power supply fan isn't working, ensure the power cable is securely plugged in. If it still doesn't work, try replacing the cable.
What to do if Biostar B560M-SILVER Motherboard system does not boot from hard disk?
If your system doesn't boot from the hard disk drive, but it boots from the optical drive, check the cable running from the disk to the disk controller board. Ensure both ends are securely plugged in and verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important.
What to do if my Biostar B560M-SILVER Motherboard shows “Invalid Configuration” or “CMOS Failure”?
If the screen message shows “Invalid Configuration” or “CMOS Failure,” review the system’s equipment and ensure the correct information is in the setup.
What to do if my Biostar Motherboard system cannot boot after installing a second hard drive?
If the system cannot boot after installing a second hard drive, set master/slave jumpers correctly and run the SETUP program to select the correct drive types.
General| Brand | Biostar |
|---|---|
| Model | B560M-SILVER |
| Category | Motherboard |
| Language | English |
Essential guidelines for preparing your workspace and handling the motherboard before installation.
List of items included in the motherboard package for user verification.
Step-by-step instructions for correctly installing the CPU into the motherboard socket.
Instructions on how to properly mount the CPU heatsink and connect its fan.
Guide for connecting CPU and system fans to the motherboard headers.
Detailed steps for installing RAM modules and configuring dual channel memory.
Information on PCI-Express slots and M.2 socket types, including installation guidance.
General steps for installing expansion cards like graphics cards or network adapters.
Explanation of jumper settings, including the Clear CMOS jumper and its procedures.
Detailed overview of internal headers for power, USB, audio, LEDs, and other essential connections.
Information on motherboard LEDs, their control, and usage with software utilities.
Instructions on accessing and navigating the UEFI BIOS Setup for system settings.
Methods and steps for updating the motherboard's BIOS using BIOSTAR utilities.
Guide to software utilities like BIOScreen, RACING GT EVO, SmartEAR, and others for system management and customization.
Steps to install essential drivers from the included DVD for optimal system performance.
List of beep codes indicating boot block and POST status errors.
Detailed list of POST codes and their corresponding system initialization stages.
Common troubleshooting scenarios and their solutions, including power issues and CPU overheating.
Information on Intel Optane technology, its benefits, and requirements for installation.
