To Next Page

To Previous Page

26 | 3. Chipset Menu

Primary Display

This item selects which of IGFX/ PEG/ PCI Graphics device should be Primary Display or select SG

for Switchable Gfx.

Opons: Auto (Default) / IGFX / PEG Slot / PCH PCI

GTT Size

This item select the GTT Size.

Opons: 8MB (Default) / 2MB / 4MB

Aperture Size

This item selects Aperature Size.

Opons: 256MB (Default) / 128MB / 512MB / 1024MB

PSMI Support

This item selects PSMI Enble / Disable.

Opons: Disable (Default) / Enble

DVMT Pre-Allocated

This item selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal

Graphics Device.

Opons: 60M (Default) / 0M / 32M / 64M / 96M / 128M / 160M / 4M / 8M / 12M / 16M / 20M /

24M / 28M / 32M/F7 / 36M / 40M / 44M / 48M / 52M / 56M

DVMT Total Gfx Mem

This item selects DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.

Opons: 256MB (Default) / 128MB / MAX

PAVP Enable

This item enables or disables PAVP.

Opons: Enabled (Default) / Disabled

Max TOLUD

Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automacally based on

largest MMIO length of installed graphic controller.

Opons: Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB / 2.25 GB / 2.5 GB / 2.75 GB

/ 3 GB / 3.25 GB / 3.5GB

VT-d

This item enables or disables VT-d capability.

Opons: Enabled (Default) / Disabled

Above 4GB MMIO BIOS assignment

This item enables or disables above 4GB Memory Mapped IO BIOS assignment. This is enabled

automacally when Aperture Size is set to 2048MB.

Opons: Enabled (Default) / Disabled

Biostar B660GTQ User Guide

Other manuals for Biostar B660GTQ