To Next Page

To Previous Page

VIVID LED Control | 9

B660GTQ

VIVID LED Control

Press <F6> to display the VIVID LED DJ Control menu.

1. LED SPARKLE: Allows to you choose sparkle of the LEDs.

• Permanent: LEDs are constantly lit.

• Breath: LEDs gradually ash on and o.

• Shine: LEDs ash at a specic frequency.

• OFF: Allows you to enable or disable VIVID LED of a single item.

2� LED COLOR:

• Auto: LEDs will Automacally change the Color Palee and LED Brightness.

If you select Auto mode, the Color Pallee and LED Brightness Bar will disabled.

• Default: All the seng are back to default.

3� LED Type: Select the LED lighng blocks.

• SYSTEM: System LED illuminaons. (ARMOR GEAR LED)

• 12V LED: The 12V LED illuminaon. (12V_LED Device)

• 5V LED: The 5V LED illuminaon. (5V_LED Device)

4� ON/OFF: To enable or disable VIVID LED funcon.

5. Color Palee: Allows to you choose specic color of the LEDs.

6. LED Brightness Bar: Allows you to adjust the LED brightness.

Note

Menu contents will be dierent slightly, depending on dierent motherboard of users’ computers.

Once you are nished making your selecons, choose the <Save & Exit> menu to save.

Biostar B660GTQ User Guide

Other manuals for Biostar B660GTQ