Biostar K8M800 MICRO AM2 Bios Setup Manual

K8M800 Micro AM2 BIOS Setup
18
AGP Driving Value
While AGP driving control item set to “Manual”, it allows user to set AGP driving.
The Choices: DA (default).
AGP Fast Write
This item allows you to disabled or enabled AGP Fast Write.
The Choices: Disabled (default), Enabled.
AGP Master 1 WS Write
When Enabled, writes to the AGP (Accelerated Graphics Port) are executed
with one-wait states.
The Choices: Disabled (default), Enabled.
AGP Master 1 WS Read
When Enabled, read to the AGP (Accelerated Graphics Port) are executed with
one wait states.
The Choices: Disabled (default), Enabled.
AGP 3.0 Calibration cycle
This item allows you to disabled or enabled AGP 3.0 Calibration Cycle.
The Choices: Disabled (default), Enabled.
DBI Output for AGP Trans
The Choices: Disabled (default), Auto.
VGA Share Memory Size
This item allows you to select the VGA share memory size.
The Choices: 64M (default), 32M, 16M Disabled.

Biostar K8M800 MICRO AM2 Specifications

General

Brand	Biostar
Model	K8M800 MICRO AM2
Category	Motherboard
Language	English