Chapter 4 Trouble Shooting
4-5
!"#$
<!
&, 3& &,.&3
Faulty Monitor. If possible, connect
monitor to another
system. If no color replace
monitor.
CMOS incorrectly set up. Call technical support.
!"#$
E!
&, 3& &,.&3
Hard drive cable not
connected properly.
Check hard drive cable.
!"#$
:.!
&, 3& &,.&3
Master/slave jumpers not
set correctly.
Set master/slave jumpers
correctly.
Hard drives not
compatible / different
manufacturers.
Run SETUP program and
select correct drive types.
Call drive manufacturers
for compatibility with other
drives.