EasyManuals Logo

Biostar NF520-A2 - BIOS SETUP User Manual

Biostar NF520-A2 - BIOS SETUP
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
NF520-A2 TE/NF520-A2 SE/NF520-A2
23
MAC LAN
This option allows you to control the onboard MAC LAN.
The Choices: Auto (default), Disabled.
MAC Media Interface
This option allows you to control the onboard MAC Media Interface.
The Choices: Pin Strap (default), MII, RGMII.
Onboard LAN Boot ROM
This item allows you to enable or disable the Onboard LAN Boot ROM.
The Choices: Disabled (default), Enabled.
Onboard I/O Address
Press Enter to configure the Onboard I/O Address.
Onboard FDC Controller
Select enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you installed another FDC or the
system uses no floppy drive, select disabled in this field.
The Choices: Enabled (default), Disabled.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Biostar NF520-A2 - BIOS SETUP and is the answer not in the manual?

Biostar NF520-A2 - BIOS SETUP Specifications

General IconGeneral
BrandBiostar
ModelNF520-A2 - BIOS SETUP
CategoryMotherboard
LanguageEnglish

Related product manuals