NF520-A2 TE/NF520-A2 SE/NF520-A2
27
Power Management
This category allows you to s elect the power saving method and is directly
related to the fo llo wing mod es :
1. HDD Po wer Do wn.
2. Suspend Mode.
There are three options of Power Management, three of which have fixed mode
settings
Min. Saving
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max. Saving
Maximum power management only available for sl CPU’s.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
Use r De fine (default)
Allow you to set each option individually.
When you choose user define, you can adjust each of the item from 1 min. to 1
hr. except for HDD Power Down which ranges from 1 min. to 15 min.
Video Off Method
This option determines the manner when the monitor goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS S upport (default)
Initial display power management signaling.
HDD Power Down
When enabled, the hard-disk drives will power do wn after a set time of system
inactivity. All other devices remain active.
The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7
Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min.
To Next Page
Loading...
Need help?
General
