EasyManua.ls Logo

Biostar NF520-A2 - BIOS SETUP - Soft-Off by Power Button; Wake On LAN (WOL); Wake On Ring (WOR); USB Resume from S3;S4

Biostar NF520-A2 - BIOS SETUP
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NF520-A2 TE/NF520-A2 SE/NF520-A2
28
Soft-Off by PBTN
This item determines the behavior of system power button. Instant off turn off
the po wer immed iately, and Delay 4 Sec. will require you to press and hold the
power button for 4 seconds to cut off the system po wer.
The Choices: Delay 4 Sec, Instant-Off (default).
WOL(PME#)/ From Soft-Off
This item allows you to enable o r disable Wake On LAN from Soft-Off
function.
The Choices: Disabled (default), Enabled.
WOR(RI#) From Soft-Off
This item allows you to enable o r disable Wake On Ring from Soft-Off function.
The Choices: Disabled (default), Enabled.
USB Resume From S3/S4
This item allows you to enab le o r d is abled the US B res ume fro m S3/S4
function.
The Choices: Disabled (default), Enabled.
Power-On by Alarm
This function is for setting date and time for your computer to boot up. When
enab led, you c an choose the date and time to boo t up the s ystem.
The Choices: Disabled (default), Enabled.
Date (of Month) Alarm
You can c hoose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can c hoos e the system boot up time, input ho ur, minute and seco nd to
specify.
Note : If you have cha nge the setting, you must let the sys tem boo t up until it
goes to the operating system, before this function will work.

Related product manuals