TA75M UEFI BIOS Manual
1
UEFI BIOS Setup
Introduction
The purpose of this manual is to describe the settings in the AMI UEFI BIOS Setup
program on this motherboard. The Setup program allows users to modify the basic
system configuration and save these settings to NVRAM.
UEFI BIOS determines what a computer can do without accessing programs from a
disk. This sys tem controls most of the input and output d evices such as keyboard,
mouse, serial ports and disk drives. BIOS activates at the firs t stage of the booting
process, loading and executing the operating s ys tem. Some add itional features, such
as virus and pass word protection or chipset fine-tuning op tions are also inc luded in
UEFI BIOS.
The rest of this manual will to guide you through the options and settings in UEFI
BIOS Setup.
Plug and Play Support
This AMI UEFI BIOS supports the Plug and Play Vers ion 1.0A spec ific ation.
EPA Green PC Support
This AMI UEFI BIOS supports Vers ion 1.03 of the EPA Green PC specification.
ACPI Support
AMI ACPI UEFI BIOS suppo rt Versio n 1.0/2.0 of Advanced Configuration and
Power interface specification (ACPI). It provides ASL code for power
management and device configuration capabilities as defined in the ACPI
specification, developed by Microsoft, Intel and Toshiba.
PCI Bus Support
This AMI UEFI BIOS also suppo rts Version 2.3 of the Intel PCI (P eripheral
Component Interconnect) local bus specification.
DRAM Support
DDR3 SDRAM (Double Data Rate III Synchronous DRAM) is supported.
To Next Page
Loading...
Need help?
General
