EasyManua.ls Logo

Biostar TA890FXE - User Manual

Biostar TA890FXE
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TA890FXE Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Questions and Answers

  • N
    Natasha PriceAug 11, 2025
    What to do if my Biostar TA890FXE has no power?
    • D
      Danny BrockAug 12, 2025
      If your Biostar Motherboard has no power, and the power LED and power supply fan are not working, ensure the power cable is securely plugged in. If that doesn't work, try replacing the power cable.
  • E
    Elizabeth BurtonAug 18, 2025
    Why won't my Biostar Motherboard boot from the hard drive?
    • K
      kelly52Aug 18, 2025
      If your Biostar Motherboard boots from the optical drive but not the hard drive, check the cable running from the hard drive to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup.
  • K
    Kevin JohnsonAug 26, 2025
    How to fix boot issues after installing a second hard drive on Biostar Motherboard?
    • M
      Matthew GilesAug 26, 2025
      If your Biostar Motherboard fails to boot after installing a second hard drive, set the master/slave jumpers correctly. Also, run the SETUP program and select the correct drive types. You may also call the drive manufacturers for compatibility with other drives.
  • R
    Rachel FieldsSep 2, 2025
    What does “Invalid Configuration” or “CMOS Failure” mean on Biostar TA890FXE?
    • D
      Derek Young PhDSep 2, 2025
      If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is in the setup.

Biostar TA890FXE Specifications

General IconGeneral
Form FactorATX
Socket TypeAM3
ChipsetAMD 890FX
Memory Slots4
Maximum Memory16GB
PCI Express 2.0 x162
PCI Express x11
PCI Slots2
SATA 3Gb/s6
Audio ChipsetRealtek ALC892
Onboard AudioYes
LAN ChipsetRealtek RTL8111E
Max. LAN Speed10/100/1000Mbps
USB 2.0 Ports6
Onboard VideoNo
Memory StandardDDR3
RAID Support0, 1, 10
Back Panel Ports1 x PS/2, 6 x USB 2.0, 6 x Audio
Audio Channels8-Channel

Related product manuals