Biostar X670E VALKYRIE User Guide

BIOS Update | 3
X670E VALKYRIE
7. A dialog pops out aer BIOS ash is completed,
asking you to restart the system. Press the <Y>
key to restart system.
8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS
setup.
Aer entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>
funcon to load Opmized Defaults, and select <Save Changes and Reset> to restart the
computer. Then the BIOS Update is completed.
BIOS Update Ulity (through the Internet)
1. Installing BIOS Update Ulity from the DVD Driver.
2. Please make sure the system is connected to the internet before using this funcon.
3. Launch BIOS Update Ulity and click the “Online
Update” buon on the main screen.
4. An open dialog will show up to request your
agreement to start the BIOS update. Click “Yes” to
start the online update procedure.
5. If there is a new BIOS version, the ulity will ask
you to download it. Click “Yes” to proceed.

Biostar X670E VALKYRIE Specifications

General

Brand	Biostar
Model	X670E VALKYRIE
Category	Motherboard
Language	English