Biostar X670E VALKYRIE User Guide

4. Boot Menu | 31
X670E VALKYRIE
SATA Support
If Last Boot HDD Only, Only last boot HDD device will be available in Post. If All Sata Devices, all
SATA devices, all SATA devices will be available in OS and Post.
VGA Support
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post.
EFI driver will sll installed with EFI OS.
USB Support
If Disabled, all USB devices will NOT be available unl aer OS boot. If Paral Inial, USB Mass
Storage and specic USB port/device will NOT be available before OS boot. If Enabled, all USB
devices will be available in OS and Post.
PS2 Devices Support
If Disabled, PS2 devices will be skipped.
Network Stack Driver Support
If Disabled, Network Stack Drivers will be skipped.
Redirecon Support
If Disabled, Redirecon funcon will be disabled.
GateA20 Acve
Upon Request !V GA20 can be disabled using BIOS services. Always !V do not allow disabling
GA20; this opon is useful when any RT code is executed above 1MB
Opon ROM Messages
This item sets the display mode for Opon ROM.
4-5 ROM Armor 3 Support
ROM Armor 3 funcon.
4-6 Boot Success Beep
When this item is set to Enabled, BIOS will let user know boot success with beep.
4-7 Boot mode select
Select boot mode LEGACY/UEFI.
4-8 Fixed Boot order Priorities
Boot Opon #1/ #2/ #3/ #4/ #5/ #6/ #7
It controls the placement of newly detected UEFI boot opons.
#1 Opons: UEFI Hard Disk (Default)
#2 Opons: UEFI NVME (Default)
#3 Opons: UEFI CD/DVD (Default)
#4 Opons: UEFI USB Hard Disk (Default)
#5 Opons: UEFI USB CD/DVD (Default)
#6 Opons: UEFI USB Key (Default)
#7 Opons: UEFI Network (Default)

Biostar X670E VALKYRIE Specifications

General

Brand	Biostar
Model	X670E VALKYRIE
Category	Motherboard
Language	English