Biostar X670E VALKYRIE User Manual

Chapter 3: UEFI BIOS & Soware | 23
X670E VALKYRIE
Chapter 3: UEFI BIOS & Soware
3.1 UEFI BIOS Setup
• The BIOS Setup program can be used to view and change the BIOS sengs for the
computer. The BIOS Setup program is accessed by pressing the <DEL> key aer the
Power-On Self-Test (POST) memory test begins and before the operang system boot
begins.
• For further informaon of seng up the UEFI BIOS, please refer to the UEFI BIOS Manual
on our website.
3.2 BIOS Update
The BIOS can be updated using either of the following ulies:
• BIOSTAR BIO-Flasher: Using this ulity, the BIOS can be updated from a le on a hard
disk, a USB drive (a ash drive or a USB hard drive), or a CD-ROM.
• BIOSTAR BIOS Update Ulity: It enables automated updang while in the Windows
environment. Using this ulity, the BIOS can be updated from a le on a hard disk, a USB
drive (a ash drive or a USB hard drive), or a CD-ROM, or from the le locaon on the
Web.
3.3 Motherboard BIOS Update
• Upload the newly update of BIOS into USB drive, change the le name to : AX67AA5T.
ROM
• (type each leer as exactly). For example: X67AE525.BST to AX67AA5T.ROM
• Connect the power into ATX 24PIN at motherboard, turn on AC power (only turn on
Power supply unit, no need for power on)
• Insert USB Drive with the le name: AX67AA5T.ROM into programmer(hardware)
• Press BIOS Update buon for 3~5 seconds, LED will start ickering, when LED light is o,
then the burning is completed.

Biostar X670E VALKYRIE Specifications

General

Brand	Biostar
Model	X670E VALKYRIE
Category	Motherboard
Language	English