Need help?Do you have a question about the Biotage TurboVap 96 Dual and is the answer not in the manual?
Provides an overview of the TurboVap 96 Dual system's front view and key components.
Explains the evaporation mechanism, gas heaters, plate heaters, and their functions.
Covers the system's ventilation, audible alarms, and LED lighting for user visibility.
Lists available manifolds and specifies compatibility with ANSI SLAS well plate standards.
Explains Manual, Time, Method modes and provides general guidelines for evaporation settings.
Guides users on how to select and determine the appropriate gas flow rates for effective evaporation.
Advises on setting gas/plate heater temperatures and determining the correct plate height for optimal results.
Details common settings like manifold setup, cabinet light, alarm volume, and screen brightness.
Covers evaporation, network, and system information settings for the instrument.
Provides further details on common settings and specific evaporation settings like idle heating.
Explains network, system info settings, and types of software messages (Error, Warning, Info).
Provides instructions for replacing the manifold and setting the system pressure correctly.
Explains Manual, Time, Method modes, and options like Off, Split, and Join cabinet operations.
Details the procedures for performing evaporation runs in Manual and Time modes.
Covers changing parameters during runs and introduces the concept of Method Mode.
Describes how to operate left and right cabinets independently or synchronized.
Provides step-by-step instructions for setting up and configuring custom evaporation methods.
Details how to set evaporation parameters for method steps, including time segments.
Explains how to edit existing methods and copy parameters from one method to another.
Covers how to monitor runs, pause, abort, and handle the end of an evaporation run.
Provides instructions for safely removing samples after the evaporation process is complete.
Instructions for cleaning the exterior of the system and the interior components.
Details methods for cleaning the manifolds, both in-place and outside the instrument.
Covers cleaning plate heaters, regular inspections, and the procedure for replacing a fuse.
Provides guidelines and steps for safely storing the system for extended periods.
Instructions on how to properly remove, clean, and store manifolds for future use.
Addresses common problems related to uneven evaporation, slow rates, splashing, and gas supply.
Provides solutions for issues with the touch screen responsiveness and lift errors.
Information about the manufacturer (Biotage) and contact details for ordering and support.
States the intellectual property status of the product, including patent pending information.
General| Number of Samples | Up to 96 |
|---|---|
| Vortexing | Yes |
| Gas Type | Nitrogen |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Sample Volume Range | 1 - 20 mL |
To Next Page
