Need help?Do you have a question about the Biotage TurboVap Series and is the answer not in the manual?
Guide on adjusting manifold nozzles for optimal performance.
Instructions for safely unpacking the TurboVap EH system.
Step-by-step guide for installing the TurboVap EH.
Procedure for filling the water bath with deionized water.
Guide on adjusting manifold nozzles for optimal performance.
Details on electrical power connection requirements and safety.
Instructions for connecting the inert gas supply to the system.
Requirements for personnel operating and maintaining the system.
Critical safety warning regarding the power switch and explosive vapors.
General safety requirements for installation and operation.
Safety precautions to be observed during system installation.
Safety guidelines to follow during system operation.
Safety advice for performing maintenance and troubleshooting.
General| Dimensions | Varies by model |
|---|---|
| Weight | Varies by model |
| Applications | Solvent Evaporation, Sample Concentration |
| Gas Supply | Nitrogen |
| Temperature Control | Digital |
| Vessel Compatibility | Test Tubes, Vials, Microplates |
| Evaporation Capacity | Multiple Samples Simultaneously |
| Temperature Range | Ambient to 80°C |
| Nitrogen Flow Rate | Adjustable |
| Display | Digital display for temperature, time, and gas flow |
| Power Requirements | 110-240V, 50/60Hz |
To Next Page
